MHC-M20.US.4-736-073-
12
(1)
32
US
Connect the BLUETOOTH device
to the system via BLUETOOTH
connection.
Press W.PARTY CHAIN on the
unit.
“CHAINING” flashes on the
display. The system enter
Wireless Party Chain setup
mode.
When the system entered
Wireless Party Chain setup
mode, connection to the
BLUETOOTH device is
terminated automatically.
3
Set the second system as a Party
Guest.
Press FUNCTION repeatedly to
select the BLUETOOTH function.
Press W.PARTY CHAIN on the
unit.
The second system becomes
a Party Guest.
“P.CHAIN” lights up on the
display.
Note
The Wireless Party Chain function is
canceled in the following situations.
— There is no operation within
1 minute after the Party Host is set
in step 2.
— W.PARTY CHAIN is pressed again
on the Party Host before step 3 is
completed.
4
Set the third or more systems as
Party Guests.
Repeat step 3.
Note
Connect the third or later systems
within 30 seconds of connecting the
previous system. “P. CHAIN” flashes
on the display of the Party Host within
30 seconds. After 30 seconds, the
system cannot be connected.
5
Wait 30 seconds after the last
Party Guest is connected.
“P.CHAIN” will stop flashing on the
display of the Party Host and the
BLUETOOTH device will reconnect to
the Party Host.
6
Start playback on the connected
BLUETOOTH device.
7
Adjust the volume.
When the volume on the Party Host
is adjusted, the volume on Party
Guests are also adjusted. If you
want to adjust the volume on a
particular Party Guest, adjust the
volume on that Party Guest.
Note
•
•
You cannot select another system as
the new Party Host while the Wireless
Party Chain is activated.
•
•
When you use the microphone on Party
Host, the sound will not be output from
Party Guests.
•
•
Sleep Timer and Auto Standby functions
are not available on Party Guests.
•
•
For detailed operation on other
systems, refer to the operating
instructions of the systems.
Hint
To add new Party Guests after Wireless
Party Chain has already been established,
hold down W.PARTY CHAIN on the Party
Host and repeat the procedure from
step 3.
To deactivate the Wireless Party
Chain
Press W.PARTY CHAIN on the Party
Host.
Note
When you change the function or turn off
the Party Host, the Wireless Party Chain
will be deactivated.
Summary of Contents for MHC-M20
Page 47: ......
Page 48: ... 2018 Sony Corporation Printed in China 4 736 073 12 1 ...