Getting Started
9
GB
Turn the TV on or off
TV
?/1
.
Switch the TV’s video
input
TV/VIDEO.
Change the TV
channels
TV CH + or –.
Adjust the volume of
the TV speaker(s)
TV VOL + or –.
When carrying this system
Perform the following procedure to protect
the CD mechanism.
1
Make sure that all discs are removed
from the unit.
2
Hold down CD and then press
?/1
until
“STANDBY” appears.
When you release the buttons, “LOCK”
appears.
3
Unplug the AC power cord.
Inserting two R6 (size AA)
batteries into the remote
E
e
E
e
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Setting the clock
1
Press
?/1
to turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
3
Press
v
or
V
repeatedly to set the hour.
4
Press
B
.
5
Press
v
or
V
repeatedly to set the
minute.
6
Press ENTER.
The clock starts working.
To adjust the clock
1
Press CLOCK/TIMER SET on the remote.
2
Press
v
or
V
repeatedly to select “CLOCK
SET”, then press ENTER.
3
Do the same procedures as step 3 to 6
above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Using the remote
You can use the buttons shown below to
operate a Sony TV.
To
Press
