6
n
Step 2: Setting the
time
You must set the time before using the timer
functions.
1
Press CLOCK TIMER SET.
The hour indication flashes.
2
Turn the jog dial to set the hour.
The clock is on a 12-hour system.
3
Press ENTER/NEXT.
The minute indication flashes.
4
Turn the jog dial to set the minute.
5
Press ENTER/NEXT.
The clock starts working.
Tips
• If you’ve made a mistake, start over from step 1.
• Setting the time deactivates the demo mode .
If you want to display the demo mode, press
DISPLAY/DEMO when the power is off.
Note
When setting the time, set the equalizer display to
anything other than Spectrum analyzer pattern 3.
(See “To change the equalizer display” on page 30.)
·∏
§
π
0
)
1
3,5
2,4
4
3,5
6 2 1
·∏
§
π
0
)
POWER
Step 3: Presetting
radio stations
The 3 band model lets you preset up to 40
stations, 20 for FM, 10 for MW and 10 for LW.
The 4band model lets you preset up to 45
stations, 20 for FM, 10 for MW and 5 for
UKV.
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
the bands you can recieve vary
depending on the model you purchased.
Be sure to check which bands you can
recieve.
Every time you press this button, the
band changes as follows:
3 band models:
FM
n
MW
n
LW
4 band model:
FM
n
MW
n
LW
n
UKV*
* “STEREO PLUS” is displayed when you select
UKV.
2
Press TUNING MODE repeatedly to
select “AUTO”.
n
