Basic Operations
17
Tips
• Pressing
·
or
ª
when the power is off
automatically turns the power on and starts tape
playback if there is a tape in the deck (One Touch
Play).
• You can switch from another source to the tape
deck just by pressing
·
or
ª
(Automatic Source
Selection).
• When you want to reduce the hiss noise in low-
level high-frequency signals, press REPEAT/
DOLBY NR so that “DOLBY NR B” appears.
• When dubbing tapes originally recorded with
Dolby NR B, the dubbed tape is automatically
played with Dolby NR B.
1
Press
§
EJECT and insert a
recorded tape in deck A or B.
2
Press EDIT/DIRECTION repeatedly
to select
A
to play one side. Select
a
* to play both sides.
To play both decks in succession, select
RELAY (relay play).**
3
P r e s s
·
.
Press
ª
to play the reverse side. The
tape starts playing.
* The deck stops automatically after
repeating the sequence five times.
** Relay play always follows the following
sequence:
Deck A (front side), Deck A (reverse side),
Deck B (front side), Deck B (reverse side).
To
Do this
Stop play
Press
(or
p
on the
remote).
Pause (Deck B only) Press . Press again to
resume play.
Fast-forward
Press
‚
while playing
the front side or
º
while
playing the reverse side.
Rewind
Press
º
while playing
the front side or
‚
while
playing the reverse side.
Remove the cassette Press
§
EJECT.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
With the side
you want to
play facing
forward
⁄
…
„
»
Æ
