background image

2

US

MHC-V21.US.4-736-607-

12

(1)

For the customers in the USA

Owner’s Record

The model and serial numbers are 
located on the rear of the unit. Record 
these numbers in the spaces provided 
below. Refer to them whenever you 
call upon your Sony dealer regarding 
this product.
Model No.  
Serial No.  

WARNING

To reduce the risk of fire or 
electric shock, do not expose this 
apparatus to rain or moisture.

To reduce the risk of fire, do not 
cover the ventilation opening of 
the appliance with newspapers, 
tablecloths, curtains, etc.
Do not expose the appliance to naked 
flame sources (for example, lighted 
candles).
To reduce the risk of fire or electric 
shock, do not expose this appliance 
to dripping or splashing, and do not 
place objects filled with liquids, such as 
vases, on the appliance.
As the main plug is used to disconnect 
the unit from the mains, connect the 
unit to an easily accessible AC outlet. 
Should you notice an abnormality in 
the unit, disconnect the main plug 
from the AC outlet immediately.
Do not install the appliance in a 
confined space, such as a bookcase or 
built-in cabinet.
The unit is not disconnected from the 
mains as long as it is connected to the 
AC outlet, even if the unit itself has 
been turned off.
Indoor use only.

CAUTION

Risk of explosion if the battery is 
replaced by an incorrect type.

Do not expose batteries or appliances 
with battery-installed to excessive 
heat, such as sunshine and fire.

CAUTION

The use of optical instruments with 
this product will increase eye hazard.

FOR UNITED STATES 
CUSTOMERS. NOT APPLICABLE 
IN CANADA, INCLUDING IN THE 
PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS 
AUX ÉTATS-UNIS. NON 
APPLICABLE AU CANADA, Y 
COMPRIS LA PROVINCE DE 
QUÉBEC.

For the customers in the USA

This symbol is intended to 
alert the user to the 
presence of uninsulated 
“dangerous voltage” within 
the product’s enclosure 
that may be of sufficient 
magnitude to constitute a 
risk of electric shock to 
persons.
This symbol is intended to 
alert the user to the 
presence of important 
operating and maintenance 
(servicing) instructions in 
the literature 
accompanying the 
appliance.

Important Safety Instructions

1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near 

water.

6)  Clean only with dry cloth.

Summary of Contents for MHC-V21

























































Reviews: