40
US
MHC-V21.US.4-736-607-
12
(1)
3
Press BLUETOOTH on system
and system
to select the
BLUETOOTH function.
“BLUETOOTH” appears on the
display.
4
Connect system
and a
BLUETOOTH device via
BLUETOOTH connection
(page 25).
5
Launch “Sony | Music Center”
and follow the on-screen
instructions to setup the
Speaker Add for system
and
system
.
“HOST” appears on the display of
system
, and “GUEST” appears on
the display of system
.
6
Set the output mode using
“Sony | Music Center” on your
BLUETOOTH device.
•
•
Double Mode: outputs the stereo
sound from both systems.
•
•
Stereo mode – right: outputs the
monaural sound of the right
channel from system
, and the
left channel from system
.
•
•
Stereo mode – left: outputs the
monaural sound of the left
channel from system
, and the
right channel from system
.
7
Start playback on the
BLUETOOTH device, and adjust
the volume.
For details, see “Listening to music
on a BLUETOOTH device” (page 26).
Note
•
•
When you use the microphone or play
the guitar on system
, the sound will
not be output from system
.
•
•
The following operations are not
available on system
when using
Speaker Add:
— Sleep Timer
— Auto Standby
— Child Lock
— Vocal Fader, Key Control & Scoring
— Controlling the system using remote
control
Settings synchronization
during Speaker Add
•
•
When the Speaker Add connection
is established, the following
settings of system
will
synchronized with system
:
•
—Volume
•
—Mega Bass
•
—Sound field and Custom EQ
•
—DJ Effect
•
—Speaker Light
•
•
When the above settings changed
on either system
or system
, the other system settings are
synchronized.
•
•
When system
is turned off,
system
also turns off.
To deactivate the Speaker Add
function
Use “Sony | Music Center” and
follow the on-screen instructions.
Note
If you want to reset one of the two
systems while using the Speaker Add
function, make sure to turn off the other
system.
If you do not turn off the other system
before restarting the Speaker Add
function, BLUETOOTH connection or
sound output may be interrupted.
Hint
•
•
If you do not deactivate the function,
the system will try to re-establish the
most recent connection the next time
you turn on the system.
