47
US
MHC-V21.US.4-736-607-
12
(1)
Additional Inf
orma
tion
•
•
Remove the disc and wipe away
the moisture on the disc, then
leave the system turned on for
a few hours until the moisture
evaporates.
The sound skips.
•
•
Wipe the disc clean (page 52).
•
•
Reload the disc.
•
•
Move the unit to a place with no
vibration.
Playback does not start from the
first track.
•
•
Set the play mode to Normal Play
(page 19).
•
•
Resume Play has been selected.
Press
twice. Then, press
to
start playback.
The MP3 disc cannot be played
back.
•
•
The data is not stored in the
supported format.
The folder name, track name, file
name and ID3 tag characters do
not appear properly.
•
•
The ID3 version is not in Version 1
(1.0/1.1) or Version 2 (2.2/2.3).
•
•
The character codes that can be
displayed by this system are as
follows:
•
—Upper cases (A to Z)
•
—Numbers (0 to 9)
•
—Symbols (< > * +, [ ] \ _)
Other characters appear as “_”.
USB device
Transferring results in an error.
•
•
You are using an unsupported USB
device. Check the information on
the website about compatible USB
devices (page 10).
•
•
The USB device is not formatted
correctly. Refer to the operating
instructions of the USB device on
how to format.
•
•
Turn off the system and remove
the USB device. If the USB device
has a power switch, turn the USB
device off and on again after
removing it from the system. Then,
perform the transfer again.
•
•
If the transfer and erase
operations are repeated multiple
times, the file structure within the
USB device becomes fragmented.
Refer to the operating instructions
of the USB device on how to deal
with this problem.
•
•
The USB device was disconnected
or the power was turned off
during transfer. Delete the
partially-transferred file, and
perform the transfer again. If this
does not fix the problem, the USB
device may be broken. Refer to the
operating instructions of the USB
device on how to deal with this
problem.
Audio files or folders on the USB
device cannot be erased.
•
•
Check if the USB device is write-
protected.
•
•
The USB device was disconnected
or the power was turned off
during the erase operation. Delete
the partially-erased file. If this
does not fix the problem, the USB
device may be broken. Refer to the
operating instructions of the USB
device on how to deal with this
problem.