background image

8

US

MHC-V21.US.4-736-607-

12

(1)

Unpacking

This unit (MHC-V21) (1)

Remote control (1)

R03 (size AAA) batteries (2)

FM lead antenna (1)

AC power cord (mains lead) (1)

Playable discs or files 

on discs/USB device

Playable discs

AUDIO CD

CD-R/CD-RW in AUDIO CD format

Playable files on discs

MP3 files (.mp3)

1)2)

Playable files on USB device

MP3 files (.mp3)

1)2)

, WMA files 

(.wma)

2)

, AAC files (.m4a/.mp4/ 

.3gp)

2)

, WAV files (.wav)

2)

Note

The CD-ROM/-R/-RW must be in DATA 
CD format that contains the MP3

1)2)

 files, 

and conforms to ISO 9660

3)

 Level 1/

Level 2 or Joliet (extended format).

The system will attempt to play back 
any data with the extensions above, 
even if it is not in the supported format. 
Playing this data may generate a 
loud noise which could damage your 
speaker system.

1)

 MP3 (MPEG 1 Audio Layer 3) is a 

standard format defined by ISO/MPEG 
for compressed audio data. MP3 files 
must be in MPEG 1 Audio Layer 3 format.

2)

 Files with copyright protection (Digital 

Rights Management) cannot be played 
back by the system.

3)

 A logical format of files and folders on 

CD-ROMs, defined by ISO (International 
Organization for Standardization).

Discs/files that cannot be played 
back

You cannot play back the 
following discs

—Data part of CD-Extra or Mixed 

Mode CDs*

—CD Graphics disc

—Super Audio CDs

—DATA CD that is created in Packet 

Write format

—DATA CD which has not been 

correctly finalized

—A disc that has a non-standard 

shape (e.g., heart, square, star)

—A disc that has adhesive tape, 

paper, or a sticker attached to it

You cannot play back the 
following files

—A WMA file in WMA DRM, WMA 

Lossless, or WMA PRO format.

—An AAC file in AAC DRM or AAC 

Lossless format.

—The AAC files which is encoded 

at 96 kHz.

—Files that are encrypted or 

protected by passwords.

—Files with DRM (Digital Rights 

Management) copyright 
protection.

The MP3 PRO audio file can be 
played back as MP3 file.

*  Mixed Mode CD: This format records 

data on the first track and audio (AUDIO 
CD data) on the second and subsequent 
tracks of a session.

Notes on CD-R/-RW

In some cases, a CD-R/-RW cannot 
be played back on this system 
due to the recording quality or 
physical condition of the disc, or 
the characteristics of the recording 
device and authoring software. 
For more information, refer to 
the operating instructions of the 
recording device.

Summary of Contents for MHC-V21

























































Reviews: