18
Playing a tape
You can use TYPE I (normal) tape or TYPE II
(CrO
2
) tapes. You can also use the
.
/
>
(AMS* function) button to quickly search for
songs you want to hear. To select either deck
A or B, press TAPE A/B repeatedly.
* AMS (Automatic Music Sensor)
3
Press
Z
and insert a recordable tape
into deck B.
4
Press REC PAUSE/START.
Deck B stands by for recording.
5
Press DIRECTION repeatedly to
select
g
to record on one side.
Select
j
(or RELAY) to record on
both sides.
6
Press REC PAUSE/START.
Recording starts.
To stop recording
Press
x
.
Tips
• If you want to record from the reverse side, press
TAPE A/B to select deck B after step 1. Press
nN
to start playback of the reverse side, then
press
x
where you want to start recording. TAPE
B reverse side indicator lights up (see page 19).
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, use + and – (or
/– on the remote) in step 2 to tune in
the desired station manually.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears after pressing REC
PAUSE/START in step 4.
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
With the side
you want to
record facing
forward
?/1
(Power)
DOLBY NR
3
2
2
1
.
X
x
>
4
N
X
x
s
M
m
>
.
nN
O
v
V
b
B
X
VOL +/–
nN
x
X
. >
m M
TAPE A/B
Recording from the radio
(continued)
