11
ß
RELAY
DAILY 1 2 REC SLEEP
DAILY 1 2 REC SLEEP
DOLBY NR
DOLBY NR
PROGRAM
REPEAT1
SHUFFLE
S
ALL DISC
1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
1
DBFB
SUR
You can preset up to 40 stations, 20 for FM, 10
for MW and 10 for SW. For South American,
Australian and Thai models, you can preset
up to 30 stations, 20 for FM and 10 for AM.
1
Press TUNER BAND repeatedly
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows:
FM
n
MW
n
SW
CD
3
2
1
4 5
ß
RELAY
DAILY 1 2 REC SLEEP
DAILY 1 2 REC SLEEP
DOLBY NR
PROGRAM
REPEAT1
SHUFFLE
S
ALL DISC
1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
1
SUR
Preset number
(Power)
Step 4: Presetting
radio stations
3
Press TUNING MEMORY.
A preset number appears in the display.
4
Turn the jog dial to select the preset
number you want.
5
Press ENTER/NEXT.
The station is stored.
6
Repeat steps 1 to 5 to store other
stations.
To tune in a station with a weak
signal
Press – or + repeatedly to tune in the station
manually.
To change the preset number
Start over from step 1.
To change the AM tuning interval
(Except for the Middle Eastern model)
The AM tuning interval is factory-preset to 9 kHz
(10 kHz in some areas). To change the AM tuning
interval, tune in any AM station first, then turn off
the power. While holding down the ENTER/NEXT
button, turn the power back on. When you change
the interval, AM preset stations will be erased. To
reset the interval, repeat the same procedure.
Tip
The preset stations are retained for a day even if you
unplug the power cord or if a power failure occurs.
2
Press and hold – or + until the
frequency indication starts to
change, then release.
Scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
n
