Basic Operations
15
The CD SYNCHRO button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) or TYPE II (CrO
2
) tapes. The
recording level is adjusted automatically.
1
Press
§
and insert a blank tape into
deck B.
DOLBY NR
DISC SKIP/
EX-CHANGE
2
3
5 4
1
To
Do this
Stop play
Press
p
(
p
on the remote).
Pause
Press
·P
(
P
on the remote).
Press again to resume play.
Select a track
During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it
when you reach the desired
track. Or press
+
(to go
forward) or
=
(to go back)
on the remote.
Find a point in
Press and hold down
)
or
a track
0
(or
)/0
on the
remote) during play and
release it at the desired point.
Select a CD
Press a DISC 1~3 button or
in stop mode
DISC SKIP/EX-CHANGE (or
D. SKIP on the remote).
Play only the
Press PLAY MODE
CD you have
repeatedly until “1 DISC”
selected
appears.
Play all CDs
Press PLAY MODE repeatedly
until “ALL DISCS” appears.
Remove the CD Press OPEN/CLOSE
6
.
Exchange other
Press DISC SKIP/
CDs while
EX-CHANGE.
playing
Adjust the
Turn VOLUME (or press
volume
/– (MHC-WX7AV)
or VOL +/– (MHC-WX5) on
the remote).
Tips
• Pressing
·P
when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
·P
or the DISC 1~3 buttons (Automatic Source
Selection).
• If there is no CD in the player, “
CD NO DISC
”
appears in the display.
• When a disc tray is selected or the CD placed on
that tray is playing, the DISC 1~3 button for the
respective tray lights green.
continued
Recording a CD
— CD Synchro Recording
With the side
you want to
record facing
forward
