16
2
Press OPEN/CLOSE
6
and place a
CD.
Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP/
EX-CHANGE repeatedly so that it lights
green.
3
Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback.
·
(for front side) lights up.
4
Press DIRECTION MODE
repeatedly to select
A
to record on
one side. Select
ß
(or RELAY) to
record on both sides.
5
Press
P
PAUSE on deck B.
Recording starts.
To stop recording
Press
π
on deck B or
p
on the CD player.
Tips
• If you want to record from the reverse side, press
ª
so that
ª
(for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears after pressing CD
SYNCHRO.
Notes
• You cannot listen to other sources while recording.
• Dolby NR and DIRECTION MODE (
ß
or
RELAY) is off when the mains AC power supply
is switched off.
Recording a CD (continued)
With the label
side up. When
you play a CD
single, place it
on the inner
circle of the
tray.
Listening to the radio
–– Preset Tuning
Preset radio stations in the tuner’s memory
first (see “Step 4: Presetting radio stations”).
CD
STEREO/
MONO
3
VOLUME
4
$
4
$
)
0
P
P
+
=
p
p
·
·
ª
·
·
ª
/–
TUNER/BAND
2
1
(Power)
