Basic Operations
21
1
Press
§
and insert a recorded tape
in deck A and a blank tape in deck
B.
2
Press HI-SPEED DUBBING.
Deck B stands by for recording.
3
Press DIRECTION MODE
repeatedly to select
A
to record on
one side. Select
ß
(or RELAY) to
record on both sides.
4
Press
P
PAUSE.
Dubbing starts.
To stop dubbing
Press
π
on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION MODE to
ß
when the
tapes you use have different lengths, the tape in
each deck reverses independently. If you select
RELAY, the tapes in both decks reverse together.
• You don’t have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
Note
Dolby NR and DIRECTION MODE (
ß
) is off
when the mains AC power supply is switched off.
With the side
you want to
play/record
facing forward
Recording from a
tape
— High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(CrO
2
) tapes. The recording level is
automatically adjusted.
DOLBY NR
3
4
1
1
2
CD
(Power)