14
G:\_Upload\4082180131\4082180131SDMM81AEP\02GB-SDMM81AEP\01GB02BAS-AEP.fm
masterpage:Left
SDM-M81
4-082-180-13(1)
Adjusting the color temperature
(COLOR)
The COLOR settings allow you to adjust the picture’s color
temperature by changing the color level of the white color field.
Colors appear reddish if the temperature is low, and bluish if the
temperature is high.
You can set the color temperature to 9300K, 6500K, 5000K or
user adjustment.
1
Press the MENU button.
The main menu appears on the screen.
2
Press the
M
(+)/
m
(–) buttons to select
(COLOR)
and press the OK button.
The COLOR menu appears on the screen.
3
Press the
M
(+)/
m
(–) buttons to select the desired
color temperature and press the OK button.
The preset color temperatures are 9300K, 6500K, and 5000K.
Since the default setting is 9300K, the whites will change
from a bluish hue to a reddish hue as the temperature is
lowered to 6500K and 5000K.
4
If necessary, fine tune the color temperature.
First press the
M
(+)/
m
(–) buttons to select ADJUST and press
the OK button. Then press the
M
(+)/
m
(–) buttons to select R
(Red) or B (Blue) and press the OK button. Then press the
M
(+)/
m
(–) buttons to adjust the color temperature and press
the OK button. Since this adjustment changes the color
temperature by increasing or decreasing the R and B
components with respect to G (green), the G component is
fixed.
If you fine tune the color temperature, the new color setting is
stored in memory for USER ADJUSTMENT and
automatically recalled whenever USER is selected.
The USER ADJUSTMENT setting is common to both the
input signals. If you change the user adjustment setting for
one input signal, the setting for the other input signal is also
changed.
To change the GAMMA setting
You can select the GAMMA setting from “GAMMA 1” –
“GAMMA 3.” The highest setting is “GAMMA 3.”
1
Press the MENU button.
The main menu appears on the screen.
2
Press the
M
(+)/
m
(–) buttons to select
(COLOR)
and press the OK button.
The COLOR menu appears on the screen.
3
Change the GAMMA setting.
First press the
M
(+)/
m
(–) buttons to select ADJUST and press
the OK button. Then press the
M
(+)/
m
(–) buttons to select
GAMMA 1 to GAMMA 3 and press the OK button.
If you change the GAMMA setting, the new setting is
automatically recalled whenever USER is selected.
To return to the main menu
Press the
M
(+)/
m
(–) buttons to select
, then press the OK
button.
R
5 0
G
5 0
B
GAMMA 2
5 0
GAMMA 3
GAMMA 1
EX I T
USE R AD J UST
T
MEN
R
5 0
G
5 0
B
GAMMA 2
5 0
GAMMA 3
GAMMA 1
EX I T
USE R AD J UST
T
MEN
01GB01COV-AEP.book Page 14 Friday, April 20, 2001 10:55 AM
