16
G:\_Upload\4082180131\4082180131SDMM81AEP\02GB-SDMM81AEP\01GB02BAS-AEP.fm
masterpage:Left
SDM-M81
4-082-180-13(1)
Additional settings
You can adjust the following menus:
• RESET
• AUDIO SELECT
• BACKLIGHT
• POWER SAVE
• LANGUAGE
• MENU LOCK
1
Press the MENU button.
The main menu appears on the screen.
2
Press the
M
(+)/
m
(–) buttons to select
m
.
Other menu icons appear on the menu screen.
3
Press the
M
(+)/
m
(–) buttons to select the desired
menu and press the OK button.
Adjust the selected menu according to the following
instructions.
x
Resetting the adjustments (RESET)
First press the
M
(+)/
m
(–) buttons to select
0
(RESET)
and press the OK button. Then press the
M
(+)/
m
(–)
buttons to select the desired mode.
•
SCREEN RESET:
The automatic picture quality adjustment
function of this monitor automatically adjusts the picture
position, phase and pitch, to the most appropriate value (for
analog RGB signal only).
•
ALL RESET
: To reset all of the adjustment data to the default
setting. The setting of the LANGUAGE menu is retained.
•
: To cancel resetting and return to the menu screen.
x
Setting the audio input
This monitor is equipped with two audio input jacks. The
effective audio input switches depending on this menu setting.
First press the
M
(+)/
m
(–) buttons to select
(AUDIO
SELECT) and press the OK button. Then press the
M
(+)/
m
(–) buttons to select the desired mode.
•
AUTO:
To select either audio input by switching with the
INPUT button.
•
INPUT1
: To select audio input via the AUDIO1 jack.
•
INPUT2
: To select audio input via the AUDIO2 jack.
Note
When you set this menu to INPUT1 or INPUT2, the audio input does not
switch even if the video input is switched with the INPUT button. If you
want to link the audio input to switching with the INPUT button, set the
menu to AUTO.
x
Adjusting the backlight
If the screen is too bright, adjust the backlight.
First press the
M
(+)/
m
(–) buttons to select
(BACKLIGHT) and press the OK button. Then press
the
M
(+)/
m
(–) buttons to adjust the desired light level.
x
Setting up the power saving mode
This monitor has a function which enables it to enter the power
saving mode automatically according to the power saving settings
of the computer. You can prevent the monitor from entering the
power saving mode by setting the following option to OFF.
For more information of the power saving mode, see page 17.
First press the
M
(+)/
m
(–) buttons to select
(POWER
SAVE) and press the OK button. Then press the
M
(+)/
m
(–) buttons to select either ON or OFF.
x
Selecting the on-screen menu language
English, German, French, Spanish, Italian and Japanese versions
of the on-screen menus are available. The default setting is
English.
First press the
M
(+)/
m
(–) buttons to select
(LANGUAGE) and press the OK button. Then press
the
M
(+)/
m
(–) buttons to select a language.
• ENGLISH
•
DEUTSCH
: German
•
FRANÇAIS
: French
•
ESPAÑOL
: Spanish
•
ITALIANO
: Italian
•
: Japanese
x
Locking the menus and controls
First press the
M
(+)/
m
(–) buttons to select
(MENU
LOCK) and press the OK button. Then press the
M
(+)/
m
(–) buttons and select ON.
Only the
1
(power) switch and
(MENU LOCK) will
operate. If any other items are selected, the
mark appears on
the screen.
To cancel the menu lock
Repeat the procedure above and set
(MENU LOCK) to OFF.
ZZ...
01GB01COV-AEP.book Page 16 Friday, April 20, 2001 10:55 AM
