7
Location and Function of Parts
Location and Function of Parts
Front Panel
Power A, B switches and status indicators
The POWER switches turn the unit on and off. The unit is
powered on when the POWER switches are on the “
?
” side,
and powered off when the POWER switches are on the
“
a
” side. The status indicators light in green when the unit
is powered on.
Depending on the system’s configuration when shipped,
there may be no optional HK-PSU02 Power Supply Unit
installed. In this case, the only available POWER switch is
A (there is no switch B).
The unit is powered on when either of the two POWER
switches (A or B) is turned on.
With an HK-PSU02 unit installed, the system continues to
function normally as long as either of the two power
supply units is operating normally.
Caution
When installing the HK-PSU02 in your unit, be sure to
contact your Sony service representative.
Note
If a status indicator does not light when you turn a POWER
switch on, there may be a fault in the power circuits. Turn
the POWER switch off and contact your Sony service
representative.
POWER A
POWER B
POWER A, B switches and status indicator
