manualshive.com logo in svg

Sony MVS-8000X SystemMVS-7000X System, User Manual

The Sony MVS-8000X System and MVS-7000X System are cutting-edge video production systems featuring advanced capabilities and remarkable performance. For a comprehensive understanding and seamless operation, you can easily access the detailed User Manual by visiting our website 88.208.23.73:8080, where it is available for free download.

Share
Download
background image

USO 

RESTRITO

Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block 

503 

 

Ch
a

p

te

r 16
  M

a

c

ro

s

 

control block, then specify the range in the numeric 
keypad control block. 

3 

Press the [COPY] button. 

This copies the specified events into the paste buffer. 

4 

Move to the edit point which is the destination within 
the macro to which you want to copy the events. 

5 

To paste the contents of the paste buffer after the edit 
point, press the [PASTE] button in the keyframe 
control block. 
To paste before the edit point, hold down the [SHIFT] 
button in the keyframe control block and press the 
[PASTE] button. 

This copies the events from the paste buffer. 

 

 

Inserting a pause event

 

1 

Press the [PAUSE] button in the keyframe control 
block, lighting it green. 

The indication “PAUSE” appears in the numeric 
keypad control block display. 

2 

If required, press the [AUTO INS] button in the 
keyframe control block to toggle the auto insert mode 
on or off. 

3 

Enter the pause duration with the numeric keypad 
control block (0 or 1 to 999 (frames)). 

4 

Press the [ENTER] button. 

•

 

If auto insert mode is on, this sets the pause duration, 
and inserts the pause event. 

•

 

When auto insert mode is off, continue to step 

5

. 

5 

When auto insert mode is off, press the [INS] button in 
the keyframe control block to insert the pause event. 

 

 

Merging macro register data

 

1 

Specify the edit point 

(see page 501)

. 

2 

Press the [RCALL] button in the numeric keypad 
control block, lighting it amber. 

3 

Enter the number of the macro register you want to 
copy using the numeric keypad buttons. 

The display shows the register number. 

4 

Press the [ENTER] button. 

The [RCALL] button goes off, and the specified 
register data is copied to the paste buffer. 
•

 

When auto insert mode is on, the data from the 
specified register is included after the edit point. 

•

 

When auto insert mode is off, continue to step 

5

. 

5 

When auto insert mode is off, to include after the edit 
point, press the [PASTE] button in the keyframe 
control block. 
To include before the edit point, hold down the 
[SHIFT] button in the keyframe control block, and 
press the [PASTE] button. 

 

In place of steps 

2 

to 

4

, you can specify the register with 

the Flexi Pad control block. 

 

For details, see “Recalling a Macro Register and 
Executing a Macro” (page 505).

 

 

The same effect is obtained if you use a button which has 
a macro attachment set. In this case, the data from the 
assigned macro register is copied into the paste buffer. 

 

 

Undoing a macro editing operation with 

  

  the numeric keypad control block

 

Immediately after inserting, modifying, deleting, or 
pasting an event, you can undo the operation by pressing 
the [UNDO] button in the numeric keypad control block. 

 

 

Saving a Macro

 

Use the following procedure to save the register after 
creating or editing/modifying a macro. 

1 

In the numeric keypad control block, press the 
[MCRO] button, turning it on. 

This assigns the numeric keypad control block to 
macro operations. 

2 

Press the [STORE] button, turning it on. 

3 

Enter the number of the register (1 to 250) in which 
you want to save the macro with the numeric keypad 
buttons. 

To search for an empty register, instead of entering a 
number, press the [.] (period) button. 
The display shows the corresponding register number. 
A letter “E” after the number indicates that the 
corresponding register is empty. 

4 

Press the [ENTER] button. 

This saves the macro data in the specified register, and 
the [STORE] button goes off. 

Summary of Contents for MVS-8000X SystemMVS-7000X System



































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MVS-8000X SystemMVS-7000X System

H3C s5820x series Quick Start Manual preview
s5820x series
Brand: H3C Pages: 32
H3C S5830V2 series Mce Command Reference preview
S5830V2 series
Brand: H3C Pages: 22
H3C s5820x series Command Reference Manual preview
s5820x series
Brand: H3C Pages: 488
H3C S10500X Series Installation, Quick Start preview
S10500X Series
Brand: H3C Pages: 3
H3C S7500 Series Manual preview
S7500 Series
Brand: H3C Pages: 8
H3C S7500 Series Command Manual preview
S7500 Series
Brand: H3C Pages: 25
H3C S12500 Series Manual preview
S12500 Series
Brand: H3C Pages: 31
H3C S12500 Series Interface Configuration Manual preview
S12500 Series
Brand: H3C Pages: 23
H3C S12500 Series Software Upgrade preview
S12500 Series
Brand: H3C Pages: 24
H3C S12500 Series Installation Instructions Manual preview
S12500 Series
Brand: H3C Pages: 126
H3C S12500-X Configuration Manual preview
S12500-X
Brand: H3C Pages: 42
H3C S6300 Series Troubleshooting Manual preview
S6300 Series
Brand: H3C Pages: 32
H3C S7500 Series Installation Manual preview
S7500 Series
Brand: H3C Pages: 13
H3C S12500 Series Reference preview
S12500 Series
Brand: H3C Pages: 16
H3C S12500 Series Configuration Manual preview
S12500 Series
Brand: H3C Pages: 39
l-com IES Series User Manual preview
IES Series
Brand: l-com Pages: 12
Aube Technologies TI034-3W Installation And User Manual preview
TI034-3W
Brand: Aube Technologies Pages: 118
HMS Networks Anybus SP2555 Startup Manual preview
Anybus SP2555
Brand: HMS Networks Pages: 16

Brands by name

Popular brands

Load more brands