– 8 –
FRONT PANEL SECTION
SHUTTER SECTION
1
Open the shutter block
assy in the direction
of arrow
A
.
3
boss
2
convex portion
of screw hole
two claws
4
front panel section
knob (BASS BOOST)
knob (AVLS)
knob (HOLD)
two claws
knob (HOLD)
knob (AVLS)
knob (BASS BOOST)
3
boss
2
convex portion of screw hole
S806
S808
S807
Note on installation front panel section:
When mounting, shift S806, S807, and S808 in
the arrow
B
direction, then shift the knobs (AVLS),
(BASS BOOST), and (HOLD) in the arrow
C
direction so
as to adjust each knob and switch position.
Note: Claws (4 pcs) are very fragile
and require careful handling.
A
B
C
Note: Do not apply an
excessive force when
removing an adhesive
sheet (FPC) from the
bracket (FPC).
• LCD flexible board mounting method.
Meeting with the screw holes (2 pcs) and claws (4 pcs),
mount the LCD flexible board and bend it into S shape
before the connector (CN801), and then fix with the sheet
(flexible) as shown in the figure.
sheet (flexible)
screw
6
screw, step
5
spring, torsion
bracket (FPC)
3
four claws
6
screw, step
1
sheet (flexible)
7
shutter section
2
LCD flexible board
(CN801)
4
sheet (FPC), adhesive
bracket (A)
spring, torsion
a
b
• Torsion spring mounting method.
Mount the torsion spring on the bracket (A),
and hook the part to the shutter leg,
and then hook the part to the bracket (A)
as shown in the figure.
b
a
