MZ-NH700/NHF800
2
Design and specifications are subject to change without notice.
Supplied accessories
AC power adaptor (1)
Remote control (1)
Headphones (for USA model) (1)
Dedicated USB cable (1)
Earphones (except USA model) (1)
NH-7WMAA Nickel metal hydride rechargeable battery (1)
CD-ROM (SonicStage/MD Simple Burner (1)*
Battery carrying case (1)
Hi-MD mode (When using a 60/74/80-minute standard disc)
(Unit: approx.hours)(JEITA)
Battery life
When recording continuously
Hi-MD mode (When using a 1GB Hi-MD disc)
(Unit: approx.hours)(JEITA
3)
)
3)
Measured in accordance with the JEITA (Japan Electronics and
Information Technology Industries Association) standard.
Batteries
Linear
PCM
Hi-SP
Hi-LP
NH-7WMAA
4)
4)
When using a 100% fully charged nickel metal hydride rechargeable
battery
3
4.5
5
LR6
5)
5)
When using a Sony LR6 (size AA)
“STAMINA” alkaline dry battery (produced in Japan)
2.5
3.5
4.5
Batteries
Linear
PCM
Hi-SP
Hi-LP
NH-7WMAA
2.5
4.5
5.5
LR6
5
8
9.5
On power sources
•
For use in your house: use the AC power adaptor supplied with this
recorder. Do not use any other AC power adaptor since it may cause the
recorder to malfunction.
Polarity of the plug
Clamp filter (2)
Carrying pouch (except USA model)
Optical cable (MZ-NH700) (except Canadian andMexican Models) (1)
*Do not play a CD-ROM on an audio CD player.
MD mode
(Unit: approx.hours)(JEITA)
When playing continuously
Hi-MD mode (When using a 1GB Hi-MD disc)
(Unit: approx.hours)(JEITA)
Hi-MD mode (When using a 60/74/80-minute standard disc)
(Unit: approx.hours)(JEITA)
MD mode
(Unit: approx.hours)(JEITA)
When using the radio (MZ-NHF800)
(Unit: approx.hours)(JEITA)
Batteries
SP
Stereo
LP2
Stereo
LP4
Stereo
NH-7WMAA
4.5
6
6.5
LR6
7.5
9.5
11
Batteries
Linear
PCM
Hi-SP
Hi-LP
NH-7WMAA
4.5
7.5
9
LR6
11
18.5
21.5
Batteries
Linear
PCM
Hi-SP
Hi-LP
NH-7WMAA
4
7.5
9
LR6
9.5
17
20
Batteries
SP
Stereo
LP2
Stereo
LP4
Stereo
NH-7WMAA
7.5
9
10
LR6
20.5
24
26
Batteries
FM/AM
TV/Wb
(weather)
6)
6)
USA model only.
NH-7WMAA
7.5
7
LR6
18.5
17
Notes on chip component replacement
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
•
Keep the temperature of the soldering iron around 270 ˚C
during repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering
or unsoldering.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE
WITH MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE
0
SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
