21
-EN
Erasing a track mark
When you record with analog (line) input,
unnecessary track marks may be
recorded. You can erase a track mark to
combine the tracks before and after the
track mark. The track numbers will
change as follows.
1
While playing the track with the track
mark you want to erase, press
P
to
pause.
2
Find the track mark by pressing
=
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. “00:00” appears in the display.
3
Press TRACK MARK to erase the
mark.
“MARK OFF” appears in the display.
The track mark is erased and the two
tracks are combined.
z
The combined track whose mark has been
erased is recorded with the date and time of
the beginning of the first of the two
combined tracks.
Adding a track mark
You can add track marks so that the
separated part after the track mark is as a
new track.
The track numbers will increase as
follows.
1
2
3
4
4
4
1
2
3
4
1
While playing or pausing an MD,
press TRACK MARK on the recorder
at the point you want to mark.
“MARK ON” appears in the display,
and a track mark is added. The track
number will increase by one.
To add track marks while
recording
Press TRACK MARK on the recorder or the
remote commander.
Note
TRACK MARK on the remote controller
does not function during playback.
1
2
3
4
5
Track numbers increase
1
2
3
Track numbers decrease
.
.
Erase a track mark
Track marking
TRACK MARK
=
TRACK MARK
P
Summary of Contents for MZ-R30 Analog PCLink
Page 39: ...39 EN ...
Page 154: ...40 E ...
Page 155: ...41 E ...
Page 156: ...Sony Corporation Printed in Japan ...
