– 30 –
* Display during MO automatic adjustment
4. If the automatic adjustment results are OK, the following will
be displayed.
5. If the automatic adjustment results are NG, the following will
be displayed.
* When the mode number is 039, 057 and the focus bias value is
NG, the following will be displayed
No. Mode No.
Adjustment
1
032
MO playback EF balance adjustment
2
033
MO playback ABCD level adjustment
3
034
MO recording EF balance adjustment
4
035
MO recording ABCD level adjustment
5
037
MO focus gain adjustment
6
038
MO tracking gain adjustment
7
061
32 cluster full REC
8
062
REC shock
9
063
32 cluster PLAY
10
039
MO focus bias adjustment
11
042
Low reflection CD EF balance adjustment
12
043
Low reflection CD ABCD level adjustment
13
045
Laser low reflection CD read adjustment
14
046
Low reflection CD tracking gain adjustment
[General Adjustment Mode]
• Set the test mode, press the
+
key, and set the general adjust-
ment mode.
• To set other modes, cut off the power once and power on again.
• When the general adjustment mode is set, the LCD display will
be as follows.
• Structure of General Adjustment Mode
”
key (CD, MO discrimination)
p
key
General
adjustment mode
CD automatic
adjustment
”
key
p
key
OK
p
key
”
key
p
key
NG
MO automatic
adjustment
OK
NG
Reset
4000
Assy MODE
Mode No.
during adjustment
51
CD RUN
* When the mode number is 039, 061 and the AT error rate is NG,
the following will be displayed.
* When NG, set the servo mode and perform the automatic adjust-
ment of the NG item. (Refer to “Servo Mode”).
Mode No.
during adjustment
37
MO RUN
00
CD mode OK
NG mode No. (Last 2 digits)
Adjustment results
55 7F
CD mode NG
Mode No. (Last 2 digits)
39 03
AT error value
CD mode NG
Mode No. (Last 2 digits)
Displayed while the
P
key is
pressed
77 : focus bias
57 30
Error code
(01 to 04)
Focus bias value
77 01
CD mode NG
CD mode NG
No. Mode No.
Adjustment
1
052
CD EF balance adjustment
2
053
CD ABCD level adjustment
3
055
CD focus gain adjustment
4
056
CD tracking gain adjustment
5
057
CD focus bias adjustment
* Display during CD automatic adjustment
Adjusting Method :
1. Set the test mode, press the
=
key to set the general adjust-
ment mode.
2. Load the CD test disc (TDYS-1) or SONY MO disc available on
the market.
3. When the
”
key is pressed, the disc is determined if CD or MO,
the automatic adjustment modes are set, and adjustments are per-
formed automatically in the following order.
• CD Automatic Adjustment
• MO Automatic Adjustment
Summary of Contents for MZ-R50 Analog PCLink
