ModelName: Network Audio Remote_E
PartNumber: A-DVK-100-14(1)
Troubleshooting
After starting this application, an error message appears and then the application
quits.
Confirm that the Wi-Fi icon is displayed in the status bar. Make sure the Wi-Fi
setting of this unit is on. For details, refer to the operating manual of this unit.
This unit cannot connect to your home network.
See “After starting this application, an error message appears and then the
application quits.”
Make sure the wireless network settings are correct. For details, refer to the
operating manual of iPhone/iPod touch. Also refer to
http://www.sony.net/audio/netsettings
Devices are not displayed on the source selection screen or the player selection
screen.
Check the connection of the power cable, the network, and the source/(network
controlled) player unit.
Check the access permission settings. Also refer to the operating manual of the
source/(network controlled) player unit and see
http://www.sony.net/audio/netsettings
Content list is not displayed.
See “Devices are not displayed on the source selection screen or the player selection
screen.”
Turn on Remote UI mode to individually display music content on iPod/iPhone
mounted to NAS-SV10i/SV20i/SV20Di.
There is no sound after a playback operation.
The content may be not supported by the device. Also refer to
http://www.sony.net/audio/netsettings
Make sure the speaker button is activated.
Check the volume settings.
