NSZ-GS7/NSZ-GX70 15
SECTION 2 - DISASSEMBLY/PART NUMBER INFORMATION
MS BOARD REMOVAL
NOTES:
Reattach Thermal Pad to MS Board and Heat sink when replacing the MS Board.
Reattach Thermal Pads to Bottom Shield and MS Board when replacing the MS Board.
A Remove 4 screws and lift up Heat sink to detach from MS Board
SCREW M2.0 x L10 (Qty. 4)
Check the bottom of the Heat Sink
if the Thermal Pad is not on the MS Board.
CAUTION: The Thermal Pad must be replaced before
reattaching the Heat Sink to the MS Board.
B Remove 2 screws and lift up MS Board to detach from Bottom Cover
SCREW M2.0 x L5 (Qty. 2)
(For Thermal Pad Part Number information, refer to
)