NSZ-GS7/NSZ-GX70 19
SECTION 2 - DISASSEMBLY/PART NUMBER INFORMATION
ANTENNA CABLE WIRE DRESSING CAUTION POINTS
CAUTION: DO NOT pull on the antenna cables at the solder joint when reinserting the antenna cables back into the clips.
CAUTION: When routing the Grey antenna cable from the AUX antenna, ensure the cable is:
1 Routed down from the AUX antenna
2 Routed 4 to 5 mm away from the Main antenna board
3 Inserted into the clips, then connected to the Wi-Fi Board
CAUTION: When routing the Black antenna cable from the Main antenna, ensure the cable is:
4 Routed down from the Main antenna
5 Under the Switching Regulator (G Board)
6 Inserted into the clip, then connected to the Wi-Fi Board
1
6
4
5
2
3
GREY AND BLACK ANTENNA CABLES