background image

NSZ-GS7/NSZ-GX70 25

SECTION 3 - UPDATES AND ADJUSTMENTS

4.  Using the arrow keys on the USB keyboard, move down the list 

and highlight 

Software update via USB update (update.zip)’ or 

press [Ctrl + S]

.

Android system recovery <2end-sony-927>

Use arrow keys to highlight, enter to select.

Reboot system now [CTRL+R]

Factory reset and keep Remot Control paired [CTRL+W]

Factory reset and un-pair Remote Control

So„wared update via USB update (update.zip) [CTRL+S]

Service mode [CTRL+A]

Power off

5.  Press 

ENTER

.

6.  Using the arrow keys on the USB keyboard, select the 

Sony 

software update package

 from the USB memory drive, and then 

press 

Enter

 

CAUTION: Do not disconnect the AC Power Cord from the AC 

Outlet or the Network Media Player once the software update has 

started.

 

The Network Media Player will start the update process and a 

progress bar displays. 

 

During the update, the LED on the front of the Network Media 

Player will blink. 

7.  When the update is complete, the 

Android System Recovery

 

screen displays.

8.  Remove the USB memory drive from the Network Media Player.
9.  Proceed to 

Re-initializing to Factory Mode.

RE-INITIALIZING TO FACTORY MODE

After completing the software update, the Network Media Player must be 

re-initialized to ensure all customer data is removed.
Verify before proceeding to the next step:

 

;

Updated the Software

10.  Using the arrow keys on the USB keyboard, move down the list 

and highlight 

Service mode

Android system recovery <2end-sony-927>

Use arrow keys to highlight, enter to select.

Reboot system now [CTRL+R]

Factory reset and keep Remot Control paired [CTRL+W]

Factory reset and un-pair Remote Control

So„wared update via USB update (update.zip) [CTRL+S]

Service mode [CTRL+A]

Power off

Summary of Contents for NSZ-GX70




































































Reviews: