48
Installing the software
1
Connect the unit to your computer with the supplied USB cable.
2
Open “My Computer,” the drive corresponding to the unit, then the readme file.
3
Follow the instructions in the readme file to install the software.
Connecting the unit to your computer
1
Turn on the unit and your computer.
2
Connect the unit to your computer with the USB cable.
Note
While using the software or transferring data, do not:
– disconnect the USB cable.
– turn off or reset the unit.
– shut down the computer, enter computer standby mode, or restart the computer.
Disconnecting
After using the software or completing the transfer, exit the software, then disconnect the USB
cable.