background image

NWZ-A726/A726B/A728/A728B/A729

2

Maximum recordable number of songs and time (Approx.)

The approximate times are based on the case in which you transfer or record only 4 
minutes songs (not including videos and photos) in the MP3 format. Other playable audio 
file format song numbers and times may differ from MP3 format.

NWZ-A726

NWZ-A728

Bit rate

Songs

Time

Songs

Time

48 kbps

2,450

163 hr. 20 min.

5,050

336 hr. 40 min.

64 kbps

1,850

123 hr. 20 min.

3,750

250 hr. 00 min.

128 kbps

925

61 hr. 40 min.

1,850

123 hr. 20 min.

256 kbps

460

30 hr. 40 min.

945

63 hr. 00 min.

320 kbps

370

24 hr. 40 min.

755

50 hr. 20 min.

NWZ-A729

Bit rate

Songs

Time

48 kbps

10,200

680 hr. 00 min.

64 kbps

7,650

510 hr. 00 min.

128 kbps

3,800

253 hr. 20 min.

256 kbps

1,900

126 hr. 40 min.

320 kbps

1,500

100 hr. 00 min.

NWZ-A726B

NWZ-A728B

Bit rate

Songs

Time

Songs

Time

48 kbps

2,450

163 hr. 20 min.

5,050

336 hr. 40 min.

64 kbps

1,850

123 hr. 20 min.

3,750

250 hr. 00 min.

128 kbps

925

61 hr. 40 min.

1,850

123 hr. 20 min.

256 kbps

460

30 hr. 40 min.

945

63 hr. 00 min.

320 kbps

370

24 hr. 40 min.

755

50 hr. 20 min.

Maximum recordable time of videos (Approx.) 

The approximate recordable times are estimated in the case where only videos are 
transferred. The time may differ, depending on the conditions under which the player is 
used.

NWZ-A726

NWZ-A728

NWZ-A729

Bit rate

Time

Time

Time

Video Format: 384 kbps

15 hr. 00 min.

30 hr. 40 min.

62 hr. 00 min.

Audio Format: 128 kbps

Video Format: 768 kbps

8 hr. 30 min.

17 hr. 30 min.

35 hr. 30 min.

Audio Format: 128 kbps

NWZ-A726B

NWZ-A728B

Bit rate

Time

Time

Video Format: 384 kbps

15 hr. 00 min.

30 hr. 40 min.

Audio Format: 128 kbps

Video Format: 768 kbps

8 hr. 30 min.

17 hr. 30 min.

Audio Format: 128 kbps

Maximum recordable number of photos that can be transferred (Approx.)

Max. 10,000
Recordable number of photos may be less depending on file sizes.

Capacity (User available capacity)

*

1

NWZ-A726: 4 GB (Approx. 3.57 GB = 3,840,638,976  bytes)
NWZ-A728: 8 GB (Approx. 7.30 GB = 7,840,956,416 bytes)
NWZ-A729: 16 GB (Approx. 14.7 GB = 15,841,820,672 bytes)
NWZ-A726B: 4 GB (Approx. 3.57 GB = 3,840,573,440 bytes)
NWZ-A728B: 8 GB (Approx. 7.30 GB = 7,840,890,880 bytes)

*

1

Available storage capacity of the player may vary.

 

A portion of the memory is used for data management functions.

Output (headphones)

Frequency response
20 to 20,000 Hz (when playing data file, single signal measurement)

Interface

Headphone: Stereo mini-jack
WM-PORT (multiple connecting terminal): 22 pins
Hi-Speed USB (USB 2.0 compliant)

Operating temperature

5 °C to 35 °C (41 °F to 95 °F)

Power source

• Built-in rechargeable lithium-ion battery
• USB power (from a computer via the supplied USB cable)

Charging time

USB-based charging
Approx. 3 hours (full charge), Approx.1.5 hours (approx. 80 %)

Battery life (continuous playback)

By setting as follows, a longer battery life can be expected.
The times below are approximated when “New Song Pop Up”, “Clear Stereo”, “DSEE(Sound 
Enhancer)”, “Dynamic Normalizer”, “Equalizer” and “VPT(Surround)” are deactivated, 
and “Screensaver” is set to “Blank.”
Furthermore, for videos, the time approximated when the brightness of the screen is set to 
“3.”

NWZ-A726/A726B/A728/A728B/
A729

Music

Playback at MP3 128 kbps

Approximately 36 hours

Playback at WMA 128 kbps

Approximately 35.5 hours

Playback at AAC-LC 128 kbps

Approximately 33.5 hours

Playback at Linear PCM 1411 kbps

Approximately 34.5 hours

Video

Playback at MPEG-4 384 kbps

Approximately 10 hours

Playback at MPEG-4 768 kbps

Approximately 9 hours

Playback at AVC 384 kbps

Approximately 8 hours

Playback at AVC 768 kbps

Approximately 8 hours

Display

2.4-inch, TFT color display with white LED-backlight, QVGA (240 × 320 pixels), 262,144 
colors

Dimensions (w/h/d, projecting parts not included)

50.2 × 93.6 × 9.3 mm (2 × 3 

3

/

4

 × 

3

/

8

 inches)

Dimension (w/h/d)

51.0 × 93.9 × 9.3 mm (2 

1

/

8

 × 3 

3

/

4

 × 

3

/

8

 inches) 

Mass

Approx. 58 g (Approx. 2.1 oz)

Supplied Accessories

Headphones (1)
USB cable (1)
Earbuds (Size S,L) (1)
Attachment (1)
Use when connecting the player to the optional cradle, etc.
Stand (1)

CD-ROM

*

1

*

2

 (1)

   – BestBuy Digital Music Store (NWZ-A726B/A728B)
   – MP3 Conversion Tool
   – Media Manager for WALKMAN
   – Windows Media Player 11
   – Operation Guide (PDF file)
Quick Start Guide (1)

*

1

Do not attempt to play this CD-ROM in an audio CD player.

*

2

Depending on the country/region in which you have purchased the player, the 
bundled software may be different.

Design and specifications are subject to change without notice.

Summary of Contents for NWZ-A726B Marketing Specifications (Black)





















































Reviews: