NWZ-B103F / B105F. GB. 3-268-876-11(1)
1
1
NWZ-B103F / B105F. GB. 3-268-876-11(1)
Before Connecting the Player
Before connecting the player to your computer, make sure that the OS is Windows XP
(Service Pack 2 or later) or Windows Vista, and the installed Windows Media Player
version on your computer is 10 or 11.
Charging the Battery
The player’s battery is recharged while the player is connected to a running computer.
Remove the USB cap and insert the USB connector to a USB port on your computer.
USB connector
To
Basic Operations
When the remaining battery indication of the display shows:
, charging is complete.
When you use the player for the first time, or if you have not used the player for a long
time, recharge it fully until
appears on the screen. For details on charging time or
battery life, see
Note
• Be careful not to accidentally bump or put stress on the player when it is connected to your computer.
It may be damaged.
On the remaining battery indication
The battery icon in the display (
page 21) changes as shown below. See
details on battery duration.
The battery power gets low as shown in the battery icon. If “LOW BATTERY” appears, you
cannot operate the player. In this case, charge the battery by connecting to your computer.
Notes
• Charge the battery in an ambient temperature of between 5 to 35 ºC.
• The number of times the battery can be recharged before it is used up is approximately 500 times.
This number differs, depending on the conditions under which you use the player.
• The battery indicator on the display is only an estimate. For example, one section of black in the
indicator will not always indicate exactly one-fourth of the battery’s charge.
• “DATA ACCESS” appears in the display while the player accesses the computer. Do not disconnect
the player while “DATA ACCESS” appears or the file being transferred may be destroyed.
Basic O
per
ations
Continued