NWZ-B103F / B105F. GB. 3-268-876-11(1)
NWZ-B103F / B105F. GB. 3-268-876-11(1)
HOLD switch
You can protect the player against accidental
operation by using the HOLD switch when
carrying it.
By rotating the HOLD switch in the direction
of the arrow (
), all the buttons are
inoperable. If you press buttons while the
HOLD function is activated, “HOLD” and
the current time appears in the display. (The
current time appears only when the clock is
set (
If you rotate the HOLD switch to the
opposite position, the HOLD function is
released.
RESET button (
Resets the player when you press the RESET
button with a small pin, etc.
When you turn on the player after resetting
it, the player activates resuming the previous
setting items.
Strap hole
This is used to attach a strap (sold
separately).
USB cap
Remove the USB cap and insert the USB
connector of the player to a USB port on your
computer.
To remove the USB cap
Remove the USB cap as shown below.
USB connector
Rear
Front
REC/STOP button (
Starts/stops recording. You can record the
sound from the microphone or the currently
received FM program.
VOL +
*
1
/– button
Adjusts the volume.
/
(Power ON/OFF) button (
Turns on/off the player.
/
button (
Selects a song, album, artist, folder or menu
item. You can also skip to the beginning of
the song/album/artist/folder, fast-forward or
fast-rewind.
*
1
button (
Starts/pauses song playback or pauses/
restarts recording. When a menu appears
on the display, use this button to confirm
menu item.
Parts and Controls
BACK/HOME
*
2
button (
Returns to the previous menu. Press and hold
this button to display the HOME menu.
Display (
Microphone (
(Headphone) jack
When connecting the headphones, insert the
plug until it clicks into place. If connected
improperly, it may not sound right.
*
1
There are tactile dots. Use them to help with
button operations.
*
2
Functions which are marked
near the buttons
are activated if you press them. Likewise
functions marked
near the buttons, are
activated if you press and hold them.
Headphones