NWZ-E435F / E436F / E438F.GB. 4-109-569-11 (1)
Troubleshooting
10
10
Message
Meaning
Remedy
Cannot save more than 30 Preset
stations.
30 broadcast stations are
already preset.
Delete unnecessary stations
first (
page 69), then
preset the stations you want
within the limit number.
Do not disconnect.
The player is connected to
a computer or other
external devices to
transfer data.
This is not an error
message. Do not disconnect
the USB cable until
transferring completes.
Firmware update failed.
Updating the firmware
failed to complete.
Follow the instructions
displayed on your
computer to retry
updating the firmware.
LOW BATTERY. Please Charge.
The player’s battery is
running low.
Charge the battery (
Not enough free space in
memory. Delete files to ensure
free space.
The player’s available
capacity is insufficient.
Connect the player to
your computer using the
supplied USB cable, and
then delete any
unnecessary data from the
player using another
software used for
transferring, or Windows
Explorer.
On hold...
Cancel HOLD function to activate
controls.
The player cannot be
operated because the
HOLD switch is set to the
HOLD position.
To operate the player, slide
the HOLD switch to the
opposite position (
Preset already exists.
You are trying to preset a
frequency that is already
preset.
Preset other frequencies.
The device’s memory was not
formatted correctly. Please re-
format using Settings menu.
The built-in flash
memory was not
formatted properly.
The built-in flash
memory was formatted
on a computer.
Select “Settings”-
“Common Settings”-
“Format” to format the
built-in flash memory
again (
Table of
Cont
ents
Men
u
Inde
x
