Sony
not
e
book
us
e
r gui
d
e
Using your notebook
38
Do not switch the power saving modes while playing DVD video.
If the virus checker is active, you need to disable it.
Do not use resident disk utilities and resident utilities to speed up access of disks, because they may cause
unstable operation.
Make sure that the screensaver is deactivated.
Region codes indicators are labeled on the DVD disks to indicate in which region and what type of player
can play the disk. Unless a '2' or 'all' is labeled on your DVD disk or on the packaging, you cannot play
the disk on this player.
Do not try to change the region code settings of the DVD-ROM drive. Any troubles caused by changing
the region code settings of the DVD-ROM drive are out of warranty.
When a DVD video disk is inserted in the DVD-ROM drive, you cannot toggle between LCD and TV by
pressing
<Fn> + <F8>
.
When a TV is connected, a part of the video screen will not appear with the factory settings. Adjust the
display resolution to 640x480.
Using the CD-RW function
Your computer is equipped with a CD-RW/DVD-ROM drive.
To burn CDs, you can use CD-RW and CD-R disks:
The
CD-RW
(CD-ReWritable) disk is a data memory medium that can be used to write, erase and rewrite
a program or other data.
The
CD-R
(CD-Recordable) is a data memory medium that can be used to write a program or other data,
but then only once.
To achieve optimum performance when writing data on a CD-RW/CD-R, you should use the following
recommendations.
