Sony Not
e
book Us
er
G
u
id
e
Using your notebook
37
❑
Do not switch power saving modes while playing a DVD video.
❑
If the virus checker is active, you need to disable it.
❑
Do not use resident disc utilities or resident utilities to speed up the access of discs, because they may cause the
system to become unstable.
❑
Make sure that the screensaver is deactivated.
❑
Depending on the display setup properties you selected, you may use the
<Fn>+<F>
command to expand the
screen to full screen size.
❑
Region codes indicators are labeled on the DVD discs to indicate in which region and on what type of player you
can play the disc. Unless a '2' (Europe belongs to region '2') or 'all' (this means that you can play this DVD
everywhere in the world) is labeled on your DVD disc or on the packaging, you cannot play the disc on this player.
❑
Do not try to change the region code settings of the DVD-ROM drive. Any difficulties caused by changing the region
code settings of the DVD-ROM drive are out of warranty.
❑
When a DVD video disc is inserted in the DVD-ROM drive, you cannot toggle between LCD and TV by pressing
<Fn>+<F8>
.
❑
When a TV is connected, a part of the video screen will not appear with the factory settings. Adjust the display
resolution to 640x480.
