Sony Notebook
User Guide
Connecting peripheral devices
74
Connecting a projector
You can connect a projector (such as the Sony LCD projector) directly to your notebook or via the port
replicator.
To connect a projector, proceed as follows:
1
Plug the RGB signal cable (1) into the monitor/VGA connector (2) identified by the symbol.
2
Plug the audio cable (3) (not supplied) into the earphone connector (4) identified by the symbol.
3
Plug the RGB signal cable and the audio cable into the connectors of the projector (5).
4
Connect the power cord (6) of the projector into an AC outlet.
✍
You may not be able to display the
computer's LCD and the external display
together, depending on the types of computer
display and projector used.
You can toggle the output between the
notebook LCD-screen and the external
monitor by pressing the key combination
<Fn>+<F7>
.