Sony Not
e
book Us
er
G
u
id
e
Getting help
80
About the docking station
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM drive in the docking station connected to the
notebook
To switch on the i.LINK™ network switch, proceed as follows :
1
Disconnect your notebook from the docking station.
2
Disconnect the AC adapter and all cables from the docking station if necessary.
3
Set the i.LINK™ network switch on the bottom of the docking station to the unmarked side with a thin
pen tip.
4
Connect the docking station to your notebook.
5
Turn on your notebook.
You can now operate the CD-RW/DVD-ROM drive or the DVD-ROM drive.
Do not set the i.LINK™ network switch when the notebook is on. It causes malfunction.
Set the i.LINK™ network switch after removing all cables connected to the docking station.
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM in the docking station connected to the
notebook when the notebook is connected to another computer by means of an i.LINK™ cable
Set the i.LINK™ network switch on the bottom of the docking station to the
On
position.
I cannot remove the disk inserted in the drive
You cannot remove disks when the computer is in a power saving mode. Return to normal mode and then
press the eject button.
The disk tray does not eject even when the eject button is pressed
Open the tray by inserting a sharp, pointed object in the manual eject hole.