Sony Notebook
User Guide
Getting help
93
The optional PCGA-UFD5/A (USB) floppy disk drive is not recognised as drive A
To set the UFD5/A to A, proceed as follows :
1
Turn the system power on.
2
Connect the UFD5/A.
3
Select
Control Panel
from the
Start
menu.
4
Double-click
System
.
5
Select the
Hardware
tab, then click
Device Manager
.
6
Select
Universal Serial Bus controllers
, then
Y-E Data USB Floppy
.
7
From the
Action
menu, click
Uninstall
.
8
Keep clicking
OK
until the
Confirmation of deletion of device
message appears.
9
Select
Scan for hardware changes
from the
Action
menu.
The UFD5/A is recognised as drive A.
About sound
My speakers are not producing sound
❑
The built-in speakers may be turned off. Press
<Fn>
+
<F3>
to turn on the speakers.
❑
The speaker volume may be turned to the minimum. Press
<Fn>
+
<F4>
, and then press
or
to
increase the volume.
❑
If your computer is powered by battery, check that the battery is inserted properly and that it is charged.
❑
If you are using an application that has its own volume control, check that the volume is turned up.
❑
Check the volume controls in Windows
®
.
❑
If you use external speakers, check that the speakers are properly connected and the volume is turned up.
If the speakers have a mute button, make sure it is off. If batteries power the speakers, check that the
batteries are inserted properly and that they are charged.
❑
If you have connected an audio cable or a set of headphones to the headphone connector, disconnect the
cable.
