250
On Screen Messages
LAN configuration error. Unauthorized NAT
address is specified. Check the NAT address.
The set NAT address cannot be used. Enter the
correct NAT address in the LAN Setup menu.
LAN configuration error. Different address
from NAT machines is specified. Check the
NAT address.
Enter the correct NAT address in the LAN Setup
menu.
LAN configuration error. Connection is not
complete as the port number overlaps.
Check the TCP and UDP port numbers in the LAN
Setup menu.
LAN configuration error. Connection is not
complete as an invalid port number is
specified.
Check the TCP and UDP port numbers in the LAN
Setup menu.
Line is busy. Try to dial again later.
Connection has filed as the line is busy. Try to dial
again later.
Local number is not set correctly in the
ISDN Setup menu. Set it correctly. Line
connected with 1B (64K).
ISDN line has been connected with 1B (64K)
channel. Set the local numbers correctly in the
ISDN Setup menu.
Local number setting for ISDN
configuration may not be correct in the
remote party. Line connected with 1B (64K).
ISDN line has been connected with 1B (64K)
channel. The local numbers may not be correctly
set in the remote party.
H.221 negotiation timeout. Restart the
system and connect again.
Turn off your system, turn it on and try to dial
again.
Dialing the same address is invalid.
You are calling the same party.
The ISDN lines fully occupied. Check
Number of Lines in the Multipoint Setup
menu, or check whether the ISDN cable is
disconnected.
Check the number of ISDN lines is correctly set in
the Multipoint Setup menu, or check the ISDN
cable connection.
Regarded as a secondary terminal as the
number of lines for ISDN configuration is
different.
Some functions may be limited as your system is
regarded as secondary terminal.
Regarded as a secondary terminal as Far End
Camera Control is set to Off.
Some functions may be limited as your system is
regarded as secondary terminal.
Check the line interface or the IP address is
set correctly.
Select the line interface correctly or enter the
correct IP address.
Dial setup error. No prefix number is
entered.
The prefix is not registered in the Dial Setup menu.
Dial setup error. No prefix number for LAN
is entered.
The prefix is not registered in the Dial Setup menu.
LAN configuration error. PPPoE is set to
On. Check the PPPoE User Name and
Password.
PPPoE is set for LAN connection. Configuration of
the user name and password is required.
LAN configuration error. IP Precedence
exceeds the maximum value.
Set the IP Precedence value between 0 and 7 in the
LAN Setup menu.
LAN configuration error. Diffserve exceeds
the maximum value.
Set the Diffserve value between 0 and 64 in the
LAN Setup menu.
Message
Meaning
Summary of Contents for PCS-1 - Video Conferencing Kit
Page 284: ...Sony Corporation ...
