32
Turning the System On/Off
1
Set the power switch on the right side of the Communication Terminal to
the off position (
a
) when the system is in standby mode.
2
Turn off the power of other equipment used for the videoconference.
Set the power switch on the Communication Terminal off when the system will not be
used for an extended period. While the power switch is off, you cannot receive a call
from a remote party.
Adjust the volume of the TV monitor during communication.
Before adjusting, set the volume on the Communication Terminal to the
appropriate position.
1
Press the /– buttons on the Remote Commander to set the
volume level on the adjustment bar displayed on the screen to the middle
position.
2
Adjust the volume on the TV monitor so that you can properly hear a
remote party speaking.
To adjust the picture on the TV monitor
Use the controls on the TV monitor to adjust the picture, hue, contrast,
brightness or sharpness.
For details on picture adjustments, refer to the Operating Instructions of the
TV.
Do not activate the TV’s surround sound feature as it cause strange sound since the echo
canceler of the Communication Terminal does not function properly.
Turning Off
Note
Adjusting the Volume on the TV Monitor
Note
Summary of Contents for PCS-1 - Video Conferencing Kit
Page 284: ...Sony Corporation ...
