107
Adjusting the Camera
Ch
a
p
te
r
3
: Da
ily
V
id
e
o
c
o
n
fe
re
n
c
e
3
Press the
V
or
v
button to select the preset number (1-6) you want to recall,
then press the PUSH ENTER button.
The setting of the preset number is recalled and the camera moves to the
position of that setting.
On backup
The built-in lithium battery enables retention of the memories such as preset
camera adjustments even if the Communication Terminal is turned off.
• The built-in lithium battery is kept charged as long as the system is operated. If the
system is not used for a long time, the battery is gradually discharged. It will be
completely discharged when you do not use the system for 12 weeks. To retain the
memories, recharge the battery.
• To recharge the battery, connect the camera to the Communication Terminal and
leave both units with the powers on for about 48 hours.
Notes
Use the following Remote Commander buttons to
adjust the camera.
: Auto adjustment On.
: Focus+. : Focus-
: Brightness.
: Backlight On/Off.
Preset Save
Preset Load
Adjustments
Camera
1
2
3
4
5
6
Summary of Contents for PCS-1 - Video Conferencing Kit
Page 284: ...Sony Corporation ...
