110
Receiving Still Images from a Remote Party
Receiving Still Images from a Remote
Party
During communication you can receive still images of the pictures shot by the
remote camera if “Far End Camera Control” items are set to “On” both in the
Answer Setup menu on the answering site and the Dial Setup menu on the
dialing site.
1
Open the Still Image menu.
Press the MENU button on the Remote Commander to display the Setup menu,
then select the
(still image) icon with the
V
or
v
button.
2
Press the FAR/NEAR button on the Remote Commander.
The picture shot by the remote camera and the FAR indicator appear on the
monitor screen in the Still Image menu window. “Send” in the menu turns to
“Receive”.
3
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select
“Receive”, then press the PUSH ENTER button.
The remote picture displayed on the monitor screen is received as a still image.
To cancel still image display
Press the PUSH ENTER button on the Remote Commander to display the
submenu. Select “Clear” with the
V
or
v
button, then press the PUSH ENTER
button.
Receive
Continuous Send
Clear
Save
Send Object
Still Image
Summary of Contents for PCS-1 - Video Conferencing Kit
Page 284: ...Sony Corporation ...
