173
Connection Examples for a Multipoint Videoconference
C
h
apt
er
8:
M
u
lti
p
o
in
t Vi
d
eoc
onf
e
re
n
ce
Installing the optional PCS-320M1 H.320MCU software in one
Communication Terminal allows you to conduct a multipoint videoconference
among up to six points by using the optional PCSA-B384S or PCSA-B768S
ISDN Unit.
About the number of ISDN lines used and number of remote
parties for a multipoint conference
You can select the number of ISDN channels to be used for connecting the first
remote point using “Number of Lines” in the Setup (participants) menu or the
Multipoint Setup menu of the Administrator Setup menu.
1B (64K):
Connection via a 1B channel
2B (128K):
Connection via 2B channels
4B (256K):
Connection via 4B channels
6B (384K):
Connection via 6B channels
The number of connectable remote point is defined by the number of ISDN
lines used and the “Number of Lines” setting. For example, when you use three
ISDN lines (up to 6B channels are usable) and set the menu to “4B (256K),”
4B channels are used for the first remote point connection, and the remaining
2B channels are used for the second remote point connection.
Using the ISDN Connection
ON LINE
POWER
LAN ALERT
ON LINE
POWER
LAN ALERT
ON LINE
POWER
LAN ALERT
ON LINE
POWER
LAN ALERT
ON LINE
POWER
LAN ALERT
DC 19.5V
AUDIO OUT
AUDIO IN
AUX1–
VIDEO IN
–AUX2
CAMERA UNIT
MIC
(PLUG IN POWER)
(MIXED)
AUX
MAIN– MONITOR– SUB
VIDEO OUT
RGB OUT
IR OUT
100BASE-TX
10BASE-T
1
2
1
2
ISDN UNIT
WHITE
BOARD
DSB
TERMINAL
VISCA OUT
ISDN
PCS-320M1
H.320 MCU
software
to ISDN 1-6
PCSA-B384S or
PCSA-B768S
ISDN Unit
to ISDN lines
ISDN modular cables
(not supplied)
The illustration shows an example using
the PCSA-B768S ISDN Unit.
Summary of Contents for PCS-1 - Video Conferencing Kit
Page 284: ...Sony Corporation ...
