104
Chapter 6
Meetings With the Upgrade Kit
Chapter 6
2
Enter the telephone number of the
first remote party to have a
meeting with in the A1 and A2
boxes (when NUMBER OF
LINES is set to 1B, only in the A1
box).
3
Press the DIAL ( ) button on the
Remote Commander.
The system dials the number that
is input in step
2
, and the
indication “Dialing” appears on
the monitor screen.
When the connection is
completed, the indication
“MEETING STARTS!” appears
on the monitor screen.
4
Repeat steps
1
to
3
to connect the
second and third parties.
To hold a meeting with
registered remote parties and
unregistered parties mixed
Follow steps
1
to
3
of “To call
registered remote parties” and steps
1
to
3
of “To call unregistered remote
parties” according to whether the party
is registered.
Receiving Calls
The procedure is same as a normal
meeting.
For details on the procedure, see
“Receiving a Call” on page 34.
Notes on Point to Multi-
Point Meetings
See also “The Attribute” on page 110.
• The chair control is only available
from this terminal. Remote parties
cannot operate it.
• This system does not support
multiplex MCU connections.
• The number of lines is set to two
when ISDN is set to 2B; is set to one
when set to 1B. This is regardless of
the setting in the Dial List menu.
• One ISDN jack can connect with
only one terminal. Even if you
connect via 1B-channel, the number
of reomte parties is up to three.
• This system does not support
connections via the Inverse
Multiplexer interface (BONDING).
Starting a Point to Multi-Point Meeting
