Chapter 2
Basic Operation During a Meeting
29
Chapter 2
1
Press the DIAL (
) button or one of the number buttons (0
– 9) on the Remote Commander.
The Manual Dial LAN menu appears on the monitor
screen.
2
Enter the IP address (or the host name and domain name)
of the remote party to have a meeting with in the
ADDRESS box.
Enter the address (or the host name and domain name) with
the number buttons on the Remote Commander.
You can enter a dot by moving the joy stick on the Remote
Commander to the right.
3
Select the bandwidth.
Move the joy stick down to select the BANDWIDTH box,
then move the joy stick on the Remote Commander to the
right or left to set the bandwidth.
If you want to check or change the settings of the Dial Setup
menu, follow step
4
on page 27; dial the number, follow step
7
on page 28. Since the LINE I/F setting is displayed on the
upper-right corner of the Manual Dial LAN menu, you can also
check the setting in the Manual Dial LAN menu.
SELECT:
Dial?
Yes:
BANDWIDTH
No: CANCEL
768K
ADDRESS
Manual Dial
LAN
