Chapter 2
Basic Operation During a Meeting
37
Chapter 2
Checking the Connection Status
00:00
Communication Status
LINE I/F
Exit: CANCEL
RATE
AUDIO MODE
VIDEO MODE
FRAME RATE
BRI
2 x 64K
G. 728
(Encode)
H. 261
CIF
15fps
G. 728
(Decode)
H. 261
CIF
15fps
CAMERA CONTROL
DATA CONTROL
LSD RATE
MLP RATE
HMLP RATE
ON
T. 120
6400
(Encode)
OFF
62.4K
6400
(Decode)
OFF
62.4K
During a meeting, you can check the status of the
communication. Elapsed time also appears on the monitor
screen during a meeting.
1
Press the MENU button on the Remote Commander.
The Menu (System Configuration) menu appears on the
monitor screen.
2
Select the COMMUNICATION with the joy stick, then
press it.
The Communication Status menu appears on the monitor
screen.
3
Check the status:
LINE I/F: Displays the line interface being used.
RATE: Displays the number of lines and the transfer rate
being used.
CAMERA CONTROL: Displays the far end camera
control protocol.
DATA CONTROL: Displays the data transmission
protocol.
(Continued)