Chapter 6
Meetings With the Multipoint Function
131
Chapter 6
Starting a Point to Multi-Point
Meeting
You can hold a point to multi-point meeting among four
terminals (including this terminal). You can add one normal
audio phone in the network.
Notes
• Before you start a meeting verify that Multipoint Mode is set
to On in the Multipoint Setup menu.
• When you establish a connection with a party marked with a
Multipoint mark, or with parties on the Multipoint list, the
status of the internal Multipoint setting is ignored, and the
connection is made using the internal Multipoint mode.
Registering a Multipoint Conference in the Multipoint
connection list
Setting up a new Multipoint connection list
1
Press the Phone Book button on the Remote Commander.
The Phone Book menu appears.
2
Select New Entry with the joystick on the Remote
Commander, then press the joystick down.
The List Edit menu appears.
3
Enter the name of the remote party in the Index box.
4
Select [
ISDN] in Line I/F.
List Edit
Index:
Cancel
Save
ISDN
A1:
A2:
B1:
B2:
C1:
C2:
Line I/F:
Prefix:
Prefix-None
Number of Lines:
6B
Restrict:
Auto
ISDN
(Continued)
