80
Chapter 3
Advanced Operation
Chapter 3
Voice Meeting
The system can connect to a normal phone to hold a meeting
using the sound only.
(Voice Meeting)
The basic procedure is same as one with images and sound.
Note
When you have upgraded the system using the optional PCS-
UC161 Upgrade Kit and using a LAN, you cannot do the voice
meeting.
To start a voice meeting with unregistered remote parties
Set Line I/F to ISDN (Telephone) in the Manual Dial menu.
For details on the setting, see “Calling an Unregistered
Remote Party” on page 42.
The indication “VOICE ONLY” appears on the monitor
screen, and the local picture is displayed on the local monitor
screen.
To register remote parties for holding a voice meeting
Set Line I/F to ISDN (Telephone) in the List Edit menu.
For details on the registration, see “Registering a Remote
Party” on page 81.
To set the audio protocol
Set up the Telephone Mode item in the Dial Setup menu.
When you call, set Telephone to Auto. This automatically sets
to G.711
µ
-law (NTSC); to G.711
a-law (PAL).
When the voice meeting starts from the remote terminal, the
audio protocol setting is not required.
For details on the setup, see “Dial Setup Menu” on page 100.
