Appendix
A-3
Appendix
8
AC OUT socket (for TV monitor) (independent
power source) (PCS-3000 only)
Connect the TV monitor power cord to this socket.
9
T.120 connector (D-sub 9-pin, male)
Connect an RS-232C device to this connector for data
input/output.
0
AUX. CONTROL connector (D-sub 9-pin, male)
Connects with external equipment for external control
from the Rollabout Package.
! ¡
ISDN A jack (8-pin modular)
Connect the ISDN line to this jack using an ISDN
modular cable.
Note
The PCS-3000/3000P Rollabout Package connects
with only one ISDN line. If you install the PCS-I300
BRI Board (not supplied; see page 4-13), you can
connect with two ISDN lines.
!™
AUDIO LINE OUT jack (phono jack)
Connect to the audio input jack of the TV monitor.
! £
AUDIO MIC1/MIC2 jacks/PLUG IN POWER
(phono jack)
Connect the Microphones (PCS-A300) to these jacks.
These provide the power supply to the microphones
connected to these jacks.
! ¢
AUDIO LINE IN jack (phono jack)
Connect the mixer unit (not supplied) for using the
multiple microphones.
!∞
VIDEO IN AUX 2 jack (phono jack)
Connect to the video output jack of a VCR or other
video equipment (not supplied).
! §
VIDEO IN AUX 1 jack (mini DIN 4-pin)
Connect to the video output jack of a VCR or other
video equipment (not supplied).
! ¶
VIDEO OUT AUX jack (phono jack)
Connect a VCR to this jack to record a meeting.
! •
VIDEO OUT MONITOR jack (mini DIN 4-pin)
Connect the TV monitor to this jack.
! ª
AC IN socket
Connect one end of the Rollabout Processor power
cord to this socket and connect the other end to an AC
power outlet.
Summary of Contents for PCS-3000
Page 8: ......
Page 36: ......
Page 122: ...Sony Corporation Printed in Japan ...
Page 123: ...PCS 3000 3000P ...