background image

1-10

Chapter 1

Using the Basic System

Chapter 1

Basic Adjustments

Note

You have to set the volume level on the TV monitor at first.

For details on setting the initial volume level on the TV monitor, see “Setting the
Initial Volume Level on the TV Monitor” on page 2-24.

Selecting the Picture

You can select the picture from both local and remote sites equipment.

Notes

• Items at the left are only displayed when it is on line.
• Items at the left are displayed even if the video equipment is not

connected to the remote party. When you select the item which does not
have equipment, the picture does not appear.

1

Select [INPUT] from the MAIN menu.
The INPUT sub-menu appears.

2

Select the picture.
Select the local picture at the right of the INPUT sub-menu, and
remote picture at the left.

If you select [SOURCE VIEW]

• A full-sized screen of the local picture is produced.
• When the still picture is displayed, the picture returns to the moving

picuture.

QUICK

MENU

END OF

MEETING

INPUT

MULTI

P in P

CAMERA

SEND

AUDIO

OTHER

NEAR
MAIN CAM

NEAR
AUX1

NEAR
AUX2

FAR
MAIN CAM

FAR
AUX1

FAR
AUX2

SOURCE VIEW

[INPUT]

Items at the left

Selected picture

FAR AUX2

Displays picture from equipment connected to the
VIDEO IN AUX2 jack at the remote party.

FAR AUX1

Displays picture from equipment connected to the
VIDEO IN AUX1 jack at the remote party.

FAR MAIN CAM

Displays picture from main camera at the remote
party.

Items at the left

Selected picture

NEAR AUX2

Displays picture from equipment connected to the
VIDEO IN AUX2 jack at the local party.

NEAR AUX1

Displays picture from equipment connected to the
VIDEO IN AUX1 jack at the local party.

NEAR MAIN CAM

Displays picture from main camera at the local party.

Summary of Contents for PCS-3000




























































































































Reviews: