Chapter 2
Settings
2-27
Chapter 2
SETUP menu items on the second page
Setting
Description
AUDIO UNIT
Select OFF.
SUB CAM CONTROL
Select ON if controlling a sub camera.
OBJECT CAM
Select ON if additional equipment is
connected to the VIDEO IN OBJECT jack.
RGB
Select PCS-G510 if a PCS-G510/G510P
Dual Monitor Board (not supplied) is
installed and computer is connected to the
RGB IN connector. Only VGA
a)
and SVGA
a)
format signals may be inputted.
SCANNER
Select PCS-D200 when using PCS-D200,
and select SCANJET when using Hewlett
Packard ScanJet 4C.
PRINTER
Select A4 when using A4 size paper, and
select LETTER when using LETTER size
one.
DUAL MONITOR
If the dual monitor board (PCS-G510/
G510P; not supplied) is installed and the
Rollabout Processor is connected to a
second monitor (with an S-VIDEO
connector), select ON. Select OFF if you do
not want to use the 2nd monitor.
VID CONTROL
Select VID-P100 when you want to control
the zoom for the VID-P100 Video
Presentation Stand (not supplied) from the
Rollabout Package, and select VID-P150
when you want to control the zoom, focus,
angle or preset for the VID-P150.
AUX1
Select ON if additional equipment is
connected to the VIDEO IN AUX1 jack.
AUX2
Select ON if additional equipment is
connected to the VIDEO IN AUX2 jack.
Note
The [BRI RATE] setting determines how the signals from the remote party
will be received. To adjust settings of your own party’s transmission
signals, go to the DIAL SETUP menu.
For details on the DIAL SETUP menu, see page 2-2.
a) VGA and SVGA is a registered trademark of the International Business Machines
Corporation.
Summary of Contents for PCS-5100
Page 8: ...Features 8 Features ...