Chapter 1 Preparation
21
Chapter 1
When the Multimedia Terminal is turned on for the first time
The setup wizard appears on the monitor screen after the self-diagnostic is
completed.
Register your local system data following the wizard.
It takes about 5 minutes for the setup wizard to appear on the screen.
Register following the instructions provided on the wizard’s screens.
Note
In the setup wizard, there is a window that asks if you want to restart your
computer.
When this window is displayed, move the cursor to Yes with the joystick,
then press it down.
Your computer restarts, and the setup wizard re-appears.
1
Select the language of the messages with the joystick on the Remote
Commander, then press the joystick.
English: Displays messages in English.
French: Displays messages in French.
German: Displays messages in German.
Japanese: Displays messages in Japanese.
Spanish: Displays messages in Spanish.
Italian: Displays messages in Italian.
Chinese: Displays messages in Chinese.
2
Select the resolution of the monitor with the joystick on the Remote
Commander, then press the joystick.
640
×
480: Sets the resolution to 640
×
480.
1024
×
768: Sets the resolution to 1024
×
768.
(Continued)
General Setup Wizard
Language:
Cancel
Next
1024x768
VGA/XGA:
English
General Setup Wizard
Language:
System Settings Change
Windows 2000 has finished installing new devices. You must restart your computer before the new settings will take effect.
Do you want to restart your computer now?
Cancel
Next
1024x768
VGA/XGA:
English
?
Yes
No