22
Chapter 1 Preparation
Chapter 1
Turning the System On/Off
3
Select Next with the joystick on the Remote Commander, then press
the joystick.
The ISDN Setup menu (Page 1) appears on the monitor screen.
4
Select your country/region with the joystick, then press the joystick.
5
Enter your country/region code in the Country/Region Code box.
(e.g., enter “1” for the USA.)
6
Select Next with the joystick on the Remote Commander, then press
the joystick.
The ISDN Setup menu (Page 2) appears on the monitor screen.
7
Enter your area code in the Area Code boxes A1 to D2.
Do not enter the first zero number of your area code.
(e.g., enter only “408” for California.)
8
Enter your telephone number and sub-address (if you set your sub-
address) in the Local Number boxes A1 to D2.
Enter the asterisk ( ) after the telephone number, then enter the sub-
address. You cannot use the alphabet in a sub-address.
Note
Register information to the next page or downward if you have
installed two or three optional PCS-I600 BRI Boards or one PCS-I601
PRI Board and using five ISDN lines or more.
ISDN Setup Wizard
Country/Region:
Cancel
Next
Previous
1
Country/Region Code:
USA
National ISDN
Protocol:
ISDN Setup Wizard
A1:
Slot5 BRI
Area Code
Local Number
Cancel
Next
Previous
A2:
B1:
B2:
C1:
C2:
D1:
D2: